Troubleshooting Bluetooth connection issues for Automower® robotic lawn mowers
Bluetooth usually provides a stable connection between the Automower® Connect app and the robotic lawn mower, provided you are within 30 meters (100 feet) of the mower and there are no obstacles in the way. Howewer, you may occasionally experience problems with pairing or connecting to the Automower® Connect app.
Troubleshooting the Bluetooth connection
In many cases, a simple restart of the mower or your mobile device can resolve the issue. If the problem persists or occurs frequently, further troubleshooting may be necessary. Our product assistant can guide you through this process, providing step-by-step solutions based on your specific conditions.
If you prefer not to use the product assistant, consider the following information:
General troubleshooting
- Proximity to the mower: Make sure you are within 5 meters (16 feet) of the mower and remain close until the pairing is complete.
- Connection time: Allow sufficient time for the product to connect, especially if your mower was recently restarted.
- Connection to another device: Check if your mower is already connected to another device. Note that Automower® NERA models support two Bluetooth connections simultanuosly, while all other models only support one.
- Location services and Bluetooth access: Verify in the Bluetooth settings on your phone and for the Automower® Connect app that Bluetooth is enabled. Android users should also enable the location services. See Enable location services and Bluetooth access .
Restart your mobile device: Sometimes, the mobile device may need to be restarted to resolve any temporary software glitches that could be preventing the Bluetooth connection.
- Pairing request approval: On some mobile models, the Bluetooth pairing request that needs to be approved can be a bit unclear. Make sure to not miss this request.
Correct mower: If you have several mowers, ensure you are attempting to connect to the correct product by checking the serial number (found on the rating plate of the product).
Bluetooth pairing
- For general instructions, refer to How to add an Automower® robotic lawn mower to Automower® Connect.
- Pairing mode: If the mower is not in pairing mode, restart it. Restarting triggers Bluetooth pairing mode for 180 seconds for all robotic lawn mowers manufactured after 2018.
- Connect@Home option: If the Connect@Home option is not available on the mower display under Accessories, restart the mower. Restarting triggers Bluetooth pairing mode for 180 seconds for all robotic lawn mowers manufactured after 2018.
- Existing pairing: Check if your mower is already paired with your Automower® Connect device:
- Open the list of products that are Bluetooth connected to your device: For Iphone users: Select Settings > Bluetooth. | For Android users: Swipe down from the top of the screen. Make sure Bluetooth is turned on.
- If the mower appears in the list, unpair it from your device: For Iphone users: Unpair your mower. | For Android users: Unpair your mower.
- Try pairing your device with your mower again, following the instructions in the Automower® Connect app.
Still not working?
If you have tried the above measures and the connection is still not working, please contact your local Husqvarna dealer.
