How to use an Automower® Coupler

To connect the guide wire to the boundary wire or repair a damaged wire in your Automower® robotic lawn mower installation, use an original Automower® Coupler. The plug is filled with grease that makes it weather-proof.

How to use an Automower® Coupler

1. Push the wires into the bottom of the coupler, one wire per hole.* The coupler has three holes – it doesn’t matter in which hole you put the wires.
2. Squeeze the coupler with pliers. Make sure to press down on both sides of the coupler.
   
   
   
3. Secure the coupler by placing it under the grass, away from the work area of the installation.

If you are using a pro wire you need to remove the outer protective layer before inserting the wire into the coupler.

Connect a guide wire to the boundary wire:

Repair a broken wire