How to replace a fuse on a battery garden tractor

If the display on your Husqvarna battery-powered garden tractor does not come on when the power switch is set to position "I", the fuse for the power control unit needs to be replaced.

A broken fuse for the power control unit is identified by a burned fuse wire.

Replacing a fuse on a garden tractor

1. Make sure that the battery charger is disconnected from the product.
2. Set the power switch to the off (O) position and remove the power switch key.
3. Open the front cover.
4. Remove the inner dashboard cover.
5. Push the 4 clips and remove the cover from the power control unit.
   
6. Pull out the fuse for the power control unit from its holder.
   
7. If the fuse is broken, replace it with a new fuse of the same type. Fuse for the power control unit A / V is 3 / 58

NOTE: If the fuse for the power control unit breaks again in a short period of time after replacement, contact your Husqvarna local authorized dealer.