How to replace a fuel filter on a ride-on mower

This is an article about how to replace a fuel filter on a ride-on mower.

In order for your Husqvarna ride-on mower to function in the optimal way, you need to make sure that the fuel filter is working properly. If the fuel filter is damaged, there can be issues with starting your ride-on mower or you can experience loss of power while using the product.

Replace a fuel filter on a ride-on mower

For this you will need:

• Protective gloves
• Flat pliers
• Hose pliers
• A new fuel filter; check your product's operator's manual for the correct fuel filter type

Method:

1. Open the engine cover to access the fuel filter.
2. Compress the fuel hose to prevent leakage.
3. Move the hose clips away from the fuel filter with a pair of flat pliers.
4. Pull off the fuel filter from the hose ends. A small quantity of fuel can leak.
5. Push the new fuel filter into the ends of the hoses. Apply liquid detergent to the ends of the fuel filter to make the connection easier.
6. Make sure filter s installed in the correct direction. Arrow towards the engine.
7. Push the hose clips against the fuel filter.