How to move a ride-on mower manually
While using your Husqvarna ride-on mower, the battery in your product may run empty or you may run out of fuel.
In these cases, you can move the ride-on mower manually.
Manually moving a battery ride-on mower
WARNING: Before operating the ride-on mower make sure that the electric parking system is engaged.
CAUTION: Do not push the product longer than necessary or at the speed higher than 6km/h.
To move a ride-on mower with a motor off, the electric parking brake system must be disengaged. The lever for the electric parking brake system is behind the left rear wheel.
- Release the lock to the electric parking brake system (A) and move the lever (B) to the left position to disengage the electric parking brake system.
- Release the lock to the electric parking brake system (A) and move the lever (B) to the right position to engage the electric parking brake system.
Manually moving a petrol ride-on mower
WARNING: Before operating the ride-on mower make sure that the by-pass is engaged.
To move the product with the engine off, the drive system must be disengaged. Pull out the drive system lever fully to disengage the drive on the axle.
Push the drive system in fully to engage the drive on the axle. Do not use the middle position.
The drive system lever is located behind the left rear wheel.