How to clean a petrol lawn mower

This is an article on how to clean a Husqvarna petrol lawn mower. If you are looking for information on how to clean a Husqvarna ride-on mower, click here.

For more information on how to clean your Husqvarna battery lawn mower, click here.

In order to keep your lawn mower in a good condition, make sure to clean it after every use.

Also, check if your product is clean before using it.

Cleaning the lawn mower deck

Issues occurring from a dirty lawn mower deck:

• Poor cutting results
• Higher energy consumption

Cleaning a petrol-powered lawn mower

WARNING: To prevent accidental start remove the ignition cable from the spark plug.

1. Remove and empty the collector and the mulch plug if the lawn mower is equipped with them.
2. Make sure that the chute is clear of debris, dirt and grass if your mower is equipped with a chute.
3. Empty the fuel tank.
4. Put the product on its side and make sure the air intakes on the engine are not blocked.
5. Use a brush to remove leaves, grass and dirt.
6. If needed, gently hose down the inner surface of the cutting cover with water. Do not use a high pressure washer to clean the product.
   CAUTION: Make sure that the product is dry before using it.

Cleaning a lawn mower externally

Cleaning:

• Use a brush to remove leaves, grass and dirt.
• Make sure that the air intake on top of the engine is not blocked.
• Do not use a high pressure washer to clean the product.
• If using water to clean the product, do not flush water directly on the engine.