How to attach and remove attachments to your ride-on mower

Ride-on mower R200-series; remove and attach the broom

1. Put height adjustment lever in service position.
2. Lower the cutting deck.
3. Remove the cutting deck according to instructions.
4. Lift broom to align.
5. Reuse bolts from the cutting deck.
6. Exit service position.
7. Attach position lock bracket to the cutting deck rod.
8. Open the cover to get access to the belt pulley and tensioner.
9. Place the drive belt in position.
10. Mount the safety cover.

Ride-on mower R300-series; remove and attach the broom

1. Remove the cutting deck according to the instruction.
2. Lift the broom to align.
3. Press the frame to release the lock.
4. Lift the broom in outer position to get access to installation.
5. Attach the position lock bracket to the cutting height rod.
6. Place the drive belt in position.
7. Push the broom into position.
8. Place the belt over pulley.
9. Manually rotate the belt until it slips into position.
10. Mount the safety cover.
11. Pull the belt tensioner into position.

How to attach and remove the cutting deck to your rider