Thank you for choosing Husqvarna Automower® – designed for commercial turf care

The Husqvarna EPOS® system includes a robotic lawn mower, a charging station, and a reference station. The mower and reference station receive satellite signals for positioning. The reference station is stationary and sends correction data to ensure accurate positioning. The work area is created virtually in an app by adding waypoints to make a map.

1. Navigation satellites
2. Satellite signals
3. Reference station
4. Correction data
5. Charging station
6. Virtual boundary
7. Stay-out zone
8. Work area
9. Mobile device
10. Docking point
11. Transport path

To complete the map installation, you need a work area and a charging station:

• The work area is where the mower operates and cuts grass, defined by virtual boundaries.
• The charging station can be inside or near the work area, connected by a transport path. The mower automatically follows along this path without mowing.

Stay-out zones can be created to prevent operation in certain areas, defined by virtual boundaries. A maintenance point can also be set where the mower is parked when not in use.

a. Automower® Connect App

• This is where you manage your initial installation and setup. In the app, you can also adjust settings and handle day-to-day operations for individual machines.

Open in the App Store
Open in Google Play

b. Husqvarna Fleet Services™

• This is where you manage your fleet of mowers and view a map overview of all your products across multiple sites. The app also supports batch commands, allowing you to update settings for the entire fleet with a single press.
• Accessible as a web service and mobile app.

Open in the App Store
Open in Google Play

Ensure the reference station and robotic lawn mower have an unimpeded sky view for reliable operation.

1. Install the apps: Download and install the Automower® Connect app and Husqvarna Fleet Services™ app on your mobile device from the App Store or Google Play.
2. Set up the reference station: Follow the operator manual to install the reference station.
3. Install the charging station: Set up the charging station in the desired location.
4. Pair the mower with the app: Connect the robotic lawn mower to the Automower® Connect app.
5. Pair the mower with the reference station: Connect the mower to the reference station via the app.
6. Pair the mower with the charging station: This will establish the docking point in front of the charging station.
7. Define the work area: Use appDrive to operate the mower clockwise around the work area, adding waypoints in the app.
8. Define stay-out zones: Use appDrive to operate the mower counterclockwise around the stay-out zones, adding waypoints in the app.
9. Set the transport path: Start in the work area and use appDrive to define the transport path from the work area to the charging station docking point, adding waypoints as needed in the app. Once the path is complete, save it to connect it to the docking point.
10. Set the maintenance point: Start at the maintenance point and use appDrive to create a path to the charging station, adding waypoints in the app. Save to connect the maintenance point to the docking point.
11. Adjust schedule and settings: Use the app to fine-tune the mower's schedule and settings.

For more information, read the operator manual for the reference station and the operator manual for the robotic lawn mower.