Chainsaw5/08/2024
How to properly mix two-stroke oil and fuel for a chainsaw
Using a proper fuel mix is important when using your Husqvarna chainsaw since it powers the engine of the product.
Inadequate fuels and incorrect mix ratios can cause serious damage to your chainsaw such as
- excessive wear
- piston seizure
- a shorter life span
Chainsaw fuel mixing tips
- Always mix fuel and oil in a clean container intended for fuel.
- Always start by filling half the amount of the petrol to be used, add the entire amount of oil, mix (agitate) the fuel mixture, then add the remaining amount of fuel.
- Do not mix more than one month’s supply of fuel at a time.
- Mix (agitate) the fuel mixture thoroughly before filling the machine’s fuel tank.
- Mix the correct ratio as specified by the manufacturer.
To find the fuel mix ratio, please refer to the operator’s manual for your product.
The fuel and oil mixture should always be 2% (50:1). We recommend that you use Husqvarna oil mixtures.
Was this article helpful?
Need more assistance?