30/08/2024

How to attach accessories to a high-pressure washer

With your Husqvarna pressure washer you can perform many tasks such as:

  • Washing a car
  • Washing a patio
  • Washing garden furniture

Depending on your specific high-pressure washer, some accessories are attached directly on the spray gun/handle and some are attached on the spray lance.

WARNING: Turn the power switch to the off (0) position and disconnect the power plug from the power source before you attach the accessory.

CAUTION: Disconnect the product from the water source before you attach the accessory.

On a high-pressure washer with a spray lance with 3-in-1 nozzle

To remove the 3-in-1 nozzle

  1. Turn the spray lance until the nozzle symbol aligns with the mark on the gun/spray handle.
  2. Push in the button on the spray lance and pull out the 3-in-1 nozzle from the gun/spray lance.

    Aligning the nozzle symbol with the mark on the spray handle

    Pulling out the 3-in-1 nozzle from the spray lance

To install the accessory

  1. Turn the spray lance until the nozzle symbol aligns with the mark on the gun/spray handle.
  2. Hold the spray lance with one hand and push in the accessory until it locks in position.

To adjust the angle of the spray handle

  1. Push the button and turn the handle clockwise or counter-clockwise.
  2. Release the button. The handle locks in position.

On a high-pressure washer equipped with a spray lance with individual nozzles

To remove the nozzle

  1. The remove the nozzle, push in the tab on the spray lance and pull out the nozzle from the spray lance.

To install the accessory

  1. To install an accessory, hold the spray lance with one hand and push in the accessory until it locks in position.

WARNING: Turn the power switch to the off (0) position and disconnect the power plug from the power source before you attach the accessory.

CAUTION: Disconnect the product from the water source before you attach the accessory.

  1. To remove the spray lance, push in the spray lance and turn it counter-clockwise.
  2. Pull out the spray lance from the spray handle.
  3. Hold the spray gun/handle with one hand and push the coupling on the accessory into the spray gun/handle.
  4. Turn the accessory clockwise and release it to lock in position.

NOTE: Some accessories come with an extension lance for a better operating position. If equipped, first add the accessory to the extension lance and then attach the lance to the spray gun/handle. Turn both lock knobs clockwise to fasten properly.

Was this article helpful?