Cutting width
Output shaft power1
Weight (excl. cutting equipment)
Included
- Grass bladeMulti 300-3
- HarnessBalance XT
- Trimmer headT45X M12
Powerful brushcutter with AutoTune™ and large cutting width
Features
Simpler starting
Three easy steps to start
AutoTune
Always optimized engine performance
Optimised shaft & gear
Optimised gear angle for best cutting performance
Adjustable handle bar
Adjustable handle bar for best comfort
Powerful and Efficient X-TORQ® Engine
Great power and efficiency
Tap 'N Go™
With Tap'n Go, line feeding is done effortlessly by simply pushing the trimmer head into the ground.
Optimised centre of gravity
Good balance with fuel tank in front of engine
Fuel pump
Fuel pump for easy starting
Auto return stop switch
When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
Ergonomic design
Ergonomic designed handles
Easy switch of cutting equipment
Magnetic locking pin holder facilitates switch of cutting equipment.
High offset post
High hande bar, more leg space
LowVib®
LowVib® sparing the user’s arms and hands
Transparent fuel tank
Tranparent tank, easy to check fuel level
Long shaft
Straight shaft for extended reach
High torque bevel gear
Bevel gear designed for optimal cutting performance.
Adjustable harness hook eyelet
Find the best balance
Specifications
AutoTune, Balance XT, CA,AU/NZ, Grass knife 300-3T-1", Trimmy T45X Art no: 967 17 67‑05 | |
|---|---|
| Engine | AutoTune, Balance XT, CA,AU/NZ, Grass knife 300-3T-1", Trimmy T45X Art no: 967 17 67‑05 |
| Cylinder displacement | 45.7 cm³ |
Output shaft power1 | 2.2 kW |
| Fuel tank volume | 1 l |
| Fuel consumption | 450 g/kWh |
| Maximum power speed | 9,000 rpm |
| Idling speed | 2,700 rpm |
| Maximum rpm output shaft | 8,800 rpm |
| Electrode gap | 0.5 mm |
| Clutch engagement speed (±120) | 4,300 rpm |
| Torque, max. | 2.6 Nm |
| Torque, max. at rpm | 6,600 rpm |
| Spark Plug | NGK CMR6H |
| Equipment | |
| Grass blade | Multi 300-3 |
| Harness | Balance XT |
| Trimmer head | T45X M12 |
| Handle type | Bullhorn |
| Control | |
| Connectivity | Not applicable |
| Capacity | |
| Cutting width | 49 cm |
| Transmission | |
| Gear ratio | 1.4 |
| Drive gear angle | 35 ° |
| Dimensions | |
| Tube diameter | 32 mm |
| Weight (excl. cutting equipment) | 8.7 kg |
| Tube length | 1,465 mm |
| Lubricant | |
| Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 |
| Lubricant type (bevel gear) | Mineral grease |
| Sound and noise | |
| Sound pressure level at operators ear | 100 dB(A) |
| Sound power level, guaranteed (LWA) | 117 dB(A) |
| Emission | |
| Exhaust emissions (HC average) EU | 45.98 g/kWh |
| Exhaust emissions (CO average) EU | 283.71 g/kWh |
| Exhaust emissions (CO average) EPA | 268.74 g/kWh |
| Exhaust emissions (NOx average) EU | 1.28 g/kWh |
| Exhaust emissions (NOx average) EPA | 1.09 g/kWh |
Exhaust emissions (CO₂ EU V)2 | 856 g/kWh |
| Vibration | |
| Equivalent vibration level (ahv, eq) left handle | 3.3 m/s² |
| Equivalent vibration level (ahv, eq) right handle | 3.5 m/s² |
Reviews
Services
Owner support
- 1Output shaft power: Net power rating as per ISO 8893, at specified RPM
- 2Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
