Brushcutter 336 RK grass blade close up
  1. Guide
How-To's & Guides

How to change to a grass blade on your brushcutter

Changing from a trimmer line to a grass blade on your Husqvarna brushcutter is easy; all you have to do is follow these simple steps. If you are changing your trimmer head outdoors, ensure it’s in a place where it’s easy to see a small tool or nut, should you drop it.

Video
How to change from trimmer head to grass blade 525RXT 1m1s 16:9 MASTER

Step-by-step guide when changing to a grass blade

  1. Remove the trimmer head by placing the locking pin in the small head on the back of the gear head. Turn the trimmer head until it locks in place.
  2. Unscrew the trimmer head by turning it clockwise
  3. Place the grass blade on top of the drive disc
  4. Place the support cup onto the grass blade
  5. Place the support flange onto the support cup
  6. Fasten the locking nut by turning it counter-clockwise
  7. Put the locking pin once again into the hole on the other side of the gearhead. Use the socket spanner to tighten the locking nut by turning it counter-clockwise.