How to switch from a trimmer line to a grass blade on a brushcutter

With your Husqvarna brushcutter, you can use different types of attachments for different tasks. If you need a sharper tool, we recommend that you switch from a trimmer line to a grass blade.

WARNING: Use protective gloves every time you handle the cutting equipment.

WARNING: Always check the operator’s manual for the product for the correct cutting equipment and guard combination.

NOTE: Make sure that the locknut cannot be removed by hand. If you can remove it by hand, it is not locking the cutting equipment sufficiently and should be replaced.

How to switch from a trimmer line to a grass blade on a battery-powered brushcutter

  1. Remove the battery.
  2. Take off the trimmer head.
  3. Attach the grass blade and the accompanying parts to the product.
  4. Block the shaft with a metal pin.
  5. Tighten the knob so that the grass blade is secure.

How to switch from a trimmer line to a grass blade on a petrol-powered brushcutter

  1. Turn off the engine.
  2. Block the shaft with a metal pin.
  3. Take off the trimmer head by turning it clockwise.
  4. Attach the grass blade and the accompanying parts to the product.
  5. Block the shaft with a metal pin.
  6. Tighten the knob so that the grass blade is secure.
Was this article helpful?