06/03/2024

How to change a hose on a high-pressure washer

Always check for damage before you operate your high-pressure washer.

Do not use the product if the parts are damaged or missing.

If the hose is worn or damaged, it can be replaced.

How to change a hose on a high-pressure washer

  1. Remove the hose stop from the high-pressure water hose.
  2. Push in the three snap locks and remove the hose reel cover.
  3. Remove the security pin and disconnect the high-pressure water hose from the swivel.
  4. Pull out the high-pressure water hose from the product.
  5. Install a new high-pressure water hose in the opposite sequence. Make sure to install the high-pressure water hose (A) and the hose guide (B) in the correct position.
  1. Pull out the hose to expose the security pin.
  2. Pull out the pin.
  3. Take off the hose.
  4. Replace the hose with a new one.
  5. Put the pin back to secure the hose.
Was this article helpful?