How to attach and remove attachments to your ride-on lawn mower

Ride-on lawn mower R200-series; remove and attach the broom

1. Put height adjustment lever in service position.
2. Lower the cutting deck.
3. Remove the cutting deck according to instructions.
4. Lift the broom to align.
5. Reuse the bolts from the cutting deck.
6. Exit service position.
7. Attach the position lock bracket to the cutting deck rod.
8. Open the cover to get access to the belt pulley and tensioner.
9. Place the drive belt in position.
10. Mount the safety cover.

Ride-on lawn mower R300-series; remove and attach the broom

1. Remove the cutting deck according to the instructions.
2. Lift the broom to align.
3. Press the frame to release the lock.
4. Lift the broom into outer position to get access to the installation.
5. Attach the position lock bracket to the cutting height rod.
6. Place the drive belt in position.
7. Push the broom into position.
8. Place the belt over the pulley.
9. Manually rotate the belt until it slips into position.
10. Mount the safety cover.
11. Pull the belt tensioner into position.

How to attach and remove the cutting deck to your ride-on front mower