How to attach accessories to a high-pressure washer
With your Husqvarna pressure washer you can perform many tasks such as:
- Washing a car
- Washing a patio
- Washing garden furniture
Depending on your specific high-pressure washer, some accessories are attached directly on the spray gun/handle and some are attached on the spray lance.
WARNING: Turn the power switch to the off (0) position and disconnect the power plug from the power source before you attach the accessory.
CAUTION: Disconnect the product from the water source before you attach the accessory.
On a high-pressure washer with a spray lance with 3-in-1 nozzle
To remove the 3-in-1 nozzle
- Turn the spray lance until the nozzle symbol aligns with the mark on the gun/spray handle.
- Push in the button on the spray lance and pull out the 3-in-1 nozzle from the gun/spray lance.
Aligning the nozzle symbol with the mark on the spray handle
Pulling out the 3-in-1 nozzle from the spray lance
To install the accessory
- Turn the spray lance until the nozzle symbol aligns with the mark on the gun/spray handle.
- Hold the spray lance with one hand and push in the accessory until it locks in position.
To adjust the angle of the spray handle
- Push the button and turn the handle clockwise or counter-clockwise.
- Release the button. The handle locks in position.
On a high-pressure washer equipped with a spray lance with individual nozzles
To remove the nozzle
- The remove the nozzle, push in the tab on the spray lance and pull out the nozzle from the spray lance.
To install the accessory
- To install an accessory, hold the spray lance with one hand and push in the accessory until it locks in position.
WARNING: Turn the power switch to the off (0) position and disconnect the power plug from the power source before you attach the accessory.
CAUTION: Disconnect the product from the water source before you attach the accessory.
- To remove the spray lance, push in the spray lance and turn it counter-clockwise.
- Pull out the spray lance from the spray handle.
- Hold the spray gun/handle with one hand and push the coupling on the accessory into the spray gun/handle.
- Turn the accessory clockwise and release it to lock in position.
NOTE: Some accessories come with an extension lance for a better operating position. If equipped, first add the accessory to the extension lance and then attach the lance to the spray gun/handle. Turn both lock knobs clockwise to fasten properly.