Cutting width
Output shaft power1
Weight (excl. cutting equipment)
Included
- Grass bladeGrass 255-4
- HarnessStandard double harness
- Trimmer headR25
Brushcutter with grass blade, trimmer head and double harness
Features
RapidReplace Trimmer Head
With the Rapid Replace™ trimmer head, you can easily reload the trimmer line without opening the cover.
Smart Start® Technology
Specially-designed engine and starter for easy and fast starting with minimum effort
Auto return stop switch
When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
Intuitive controls
All controls are designed to be easy to understand and use.
Easy starting
Air purge removes air from carburetor and fuel system for easy starting
Standard double harness
Standard double harness for lighter brushcutters provides a comfortable working position.
See-through fuel tank
Transparent fuel tank makes it easy to check the fuel level.
Optimum comfort
Soft handles for optimal comfort. The bar handle makes turning and using the trimmer at different angles easy.
Extended reach
Straight shaft for extended reach
High torque bevel gear
Bevel gear designed for optimal cutting performance.
Specifications
R25+Grass 255-4, All ex US50, CA Art no: 967 19 33‑05 | |
|---|---|
| Engine | R25+Grass 255-4, All ex US50, CA Art no: 967 19 33‑05 |
| Cylinder displacement | 27.6 cm³ |
Output shaft power1 | 0.85 kW |
| Fuel tank volume | 0.34 l |
| Fuel consumption | 495 g/kWh |
| Maximum power speed | 8,000 rpm |
| Idling speed | 2,800 rpm |
| Maximum rpm output shaft | 7,200 rpm |
| Electrode gap | 0.5 mm |
| Clutch engagement speed (±120) | 4,200 rpm |
| Torque, max. | 1.1 Nm |
| Torque, max. at rpm | 6,000 rpm |
| Spark Plug | NGK CMR6A |
| Equipment | |
| Grass blade | Grass 255-4 |
| Harness | Standard double harness |
| Saw blade | Not included |
| Trimmer head | R25 |
| Handle type | Ergonomic |
| Control | |
| Connectivity | Not applicable |
| Capacity | |
| Cutting width | 43 cm |
| Transmission | |
| Gear ratio | 0.68 |
| Drive gear angle | 30 ° |
| Dimensions | |
| Tube diameter | 25.4 mm |
| Weight (excl. cutting equipment) | 5.4 kg |
| Tube length | 1,483 mm |
| Lubricant | |
| Lubricant type (Engine) | Husqvarna 2 stroke or equiv. at 50:1 |
| Lubricant type (bevel gear) | Mineral grease |
| Sound and noise | |
| Sound pressure level at operators ear | 89 dB(A) |
| Sound power level, guaranteed (LWA) | 115 dB(A) |
| Emission | |
| Exhaust emissions (HC average) EU | 28.2 g/kWh |
| Exhaust emissions (HC average) CARB | 31.56 g/kWh |
| Exhaust emissions (CO average) EU | 43.3 g/kWh |
| Exhaust emissions (CO average) EPA | 30.3 g/kWh |
| Exhaust emissions (NOx average) EU | 2.1 g/kWh |
| Exhaust emissions (NOx average) EPA | 1.82 g/kWh |
Exhaust emissions (CO₂ EU V)2 | 1,504 g/kWh |
| Vibration | |
| Equivalent vibration level (ahv, eq) left handle | 4.62 m/s² |
| Equivalent vibration level (ahv, eq) right handle | 6.51 m/s² |
Reviews
Services
Owner support
- 1Output shaft power: Net power rating as per ISO 8893, at specified RPM
- 2Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.
